Tektronix Phaser 600 - Manual (Page 749)

O R D E R I N G I N T E R F A C E C A B L E S A N D A D A P T E R S
7 3 2
Ordering Interface cables and adapters
The following cables and adapters are available through Tektronix or your dealer.
Contact your dealer for other cables and adapters.
Order
number Description Connectors and cable length
012-1468-00 Parallel cable
Connects the printer’s parallel port to a
PC or workstation parallel port.
36-pin high-density plug to 25-pin
DSUB plug; 3 meters (9.84 feet)
013-0299-00 Parallel/Centronics adapter
Adapts your system’s existing low-density,
Centronics parallel cable connector to the
printer’s high-density parallel connector.
Converts 36-pin low-density 1284-B
plug to 36-pin high-density 1284-C
plug
012-1465-00 SCSI-2 HD to SCSI-1 LD cable
Connects the printer’s SCSI port to a hard
disk drive or the Phaser Copystation SCSI
port.
50-pin high-density plug to 50-pin
low-density plug; 2.0 meters (6.56
feet)
012-1299-00 SCSI-1 LD to Macintosh SCSI cable
Combine with 013-0297-00 to connect the
printer’s SCSI port to a hard disk drive
with Macintosh SCSI 25-pin plug.
50-pin low-density plug to
Macintosh SCSI 25-pin plug