ZyXEL Communications NBG-419N - Manual (Page 52)

Chapter 6 Easy Mode
NBG-419N User’s Guide
52
Click Status to open the following screen screen.
Figure 27 Easy Mode: Status Screen
6.2 What You Can Do
You can do the following in this mode:
• Use this Navigation Panel ( Section 6.4 on page 53 ) to opt out of the Easy
mode.
• Use the Network Map screen ( Section 6.5 on page 53 ) to check if your NBG-
419N can ping the gateway and whether it is connected to the Internet.
• Use the Control Panel ( Section 6.6 on page 54 ) to configure and enable NBG-
419N features, including wireless security, wireless scheduling and bandwidth
management and so on.
• Use the Status Screen screen ( Section 6.7 on page 61 ) to view read-only
information about the NBG-419N, including the WAN IP, MAC Address of the
NBG-419N and the firmware version.
6.3 What You Need to Know
Between the different device modes, the Control Panel ( Section 6.6 on page 54 )
changes depending on which features are applicable to the mode:
• Router Mode: All Control Panel features are available.
Control Panel
Status Screen
Go to
Network
Map
Screen
Navigation Panel