ZyXEL Communications NBG-419N User Manual

Page 83

Advertising

Chapter 9 WISP Mode

NBG-419N User’s Guide

- CPU Usage

This displays what percentage of the NBG-419N’s processing ability is
currently used. When this percentage is close to 100%, the NBG-419N is
running at full load, and the throughput is not going to improve anymore.
If you want some applications to have more throughput, you should turn
off other applications (for example, using bandwidth management.

- Memory Usage

This shows what percentage of the heap memory the NBG-419N is using.

System Setting
- Firewall

This shows whether the firewall is enabled or not.

- Bandwidth

Management

This shows whether the bandwidth management is enabled or not.

- UPnP

This shows whether UPnP is enabled or not.

- Configuration Mode

This shows the web configurator mode you are viewing - Expert.

Interface Status

Interface

This displays the NBG-419N port types. The port types are: LAN and
WLAN.

Status

For the LAN and WAN ports, this field displays Down (line is down) or Up
(line is up or connected).

For the WLAN, it displays Up when the WLAN is enabled or Down when
the WLAN is disabled.

Rate

For the LAN ports, this displays the port speed and duplex setting or N/A
when the line is disconnected.

For the WAN port, it displays the port speed and duplex setting if you’re
using Ethernet encapsulation and Idle (line (ppp) idle), Dial (starting to
trigger a call) and Drop (dropping a call) if you're using PPPoE or PPTP
encapsulation. This field displays N/A when the line is disconnected.

For the WLAN, it displays the maximum transmission rate when the WLAN
is enabled and N/A when the WLAN is disabled.

Summary
BW MGMT Monitor

Click Details... to go to the Monitor >

BW MGMT Monitor screen

(

Section 4.3 on page 43

Use this screen to view the amount of

network bandwidth that applications running in the network are

using.

DHCP Table

Click Details... to go to the

Monitor >