ZyXEL Communications NBG-419N - Manual (Page 68)

Chapter 7 Router Mode
NBG-419N User’s Guide
68
Packet
Statistics Use this screen to view port status and packet specific
statistics.
WLAN Station
Status Use this screen to view the wireless stations that are
currently associated to the NBG-419N.
CONFIGURATION
Network
Wireless
LAN
General Use this screen to configure wireless LAN.
MAC Filter Use the MAC filter screen to configure the NBG-419N to
block access to devices or block the devices from
accessing the NBG-419N.
Advanced This screen allows you to configure advanced wireless
settings.
QoS Use this screen to configure Wi-Fi Multimedia Quality of
Service (WMM QoS). WMM QoS allows you to prioritize
wireless traffic according to the delivery requirements of
individual services.
WPS Use this screen to configure WPS.
WPS
Station Use this screen to add a wireless station using WPS.
Scheduling Use this screen to schedule the times the Wireless LAN is
enabled.
WDS Use this screen to set up Wireless Distribution System
(WDS) on your NBG-419N.
WAN Internet
Connection This screen allows you to configure ISP parameters, WAN
IP address assignment, DNS servers and the WAN MAC
address.
Advanced Use this screen to configure other advanced properties.
IGMP
Snooping Use this screen to enable IGMP snooping if you have LAN
users that subscribe to multicast services.
LAN IP Use this screen to configure LAN IP address and subnet
mask.
IP Alias Use this screen to have the NBG-419N apply IP alias to
create LAN subnets.
DHCP
Server
General Use this screen to enable the NBG-419N’s DHCP server.
Advanced Use this screen to assign IP addresses to specific
individual computers based on their MAC addresses and to
have DNS servers assigned by the DHCP server.
NAT General Use this screen to enable NAT.
Application Use this screen to configure servers behind the NBG-
419N.
Advanced Use this screen to change your NBG-419N’s port triggering
settings.
DDNS General Use this screen to set up dynamic DNS.
Static
Route
IP Static
Route Use this screen to configure IP static routes.
Table 26 Navigation Panel: Router Mode
LINK TAB FUNCTION