GE Industrial Solutions AF-300 G11 - Manual (Page 127)

11-4
Data subject to change without notice 7/07. © 2007 GE Drives
11.2 Common Specifications (continued)
Explanation
Output frequency, setting frequency, output current, output voltage, motor synchronous speed,
line speed, load rotation speed, calculated PID value, PID command value, PID feedback value,
alarm code.
Operation information, operational guide, functional code/name/setting data, alarm information,
tester function, motor load rate measuring function (Maximum/average current (rms) during
measuring period, maintenance information (integrated operation hours, capacitance
measurement for main circuit capacitors, heatsink temperature, etc.
Six languages (Japanese, English, German, French, Spanish, Italian)
Charging (voltage residual), operation indication
Overcurrent, short-circuit, ground fault, overvoltage, undervoltage, overload, overheating, blown
fuse, motor overload, external alarm, input open-phase, output open0phase (when tuning),
braking resistor protection, CPU and memory error, keypad panel communications error, PTC
thermistor protection, surge protection, stall prevention, etc.
Indoor, altitude less than 3300 feet (1000m), free from corrosive gas, dust and direct sunlight.
-10 to +50°C (+14 to 122°F) (ventilating cover must be removed under conditions exceeding +40°C
(+104°F) for models rated at 30 HP or less)
3mm peak from 2-9 Hz, 9.8 m/s 2 from 9-20 Hz, 2m/s 2 from 20-55 Hz, 1 m/s 2 from 55-200 Hz,
Storage
Ambient
temperature -25 to 65°C (-13 to 149°F)
Ambient
humidity 5 to 95% (no condensation)
Lamp display
Protective function
Indication
Item
Liquid crystal display
Digital display LED
Language
Installation location
Ambient temperature
Vibration
Environment