Armasight NSMNYX14P1F6DA1 NYX-14 Pro FLAG Night Vision Monocular - Manual (Page 26)

26
B
C
FIGURE 3-12. MOUNTING A CAMERA TO THE NYX-14 PRO
A
3.1.13 UNIVERSAL CAMERA ADAPTER APPLICATION
To mount the Nyx-14 PRO (affixed with a camera or video recorder) to a tripod, you will need a universal
camera adapter. Mount the connected devices to a tripod as follows:
1. Screw the adapter onto the tripod.
2. Remove the eyecup from the Nyx-14 PRO eyepiece.
3. Install the Nyx-14 PRO on the adapter rail (A) and tighten the fixing screw (B).
4. Install the camera on the adapter rail (C) and insert the fixing screw (D) into the tripod socket of the
camera. Tighten the fixing screw.
5. Loosen the screws one by one. Align the optical axis of the Nyx-14 PRO with the camera objective.
Tighten the screws (E and F).
6. To focus the image, loosen the screw (G) and adjust the distance between the monocular and the
camera’s eyepiece. Tighten the screw (G).
F
E
D
B
C
FIGURE 3-13. UNIVERSAL CAMERA ADAPTER APPLICATION
G
A
3.1.14 MOUNTING A DEMIST SHIELD TO THE NYX-14 PRO
Mount a demist shield to the Nyx-14 PRO as follows:
1. Remove the eyecup from the Nyx-14 PRO eyepiece.
2. Coat the demist shield with an anti-fogging compound, to prevent condensation on the surface of
the shield.
3. Screw the demist shield into the threading of the eyepiece.
4. Secure the eyecup back into place.
3.1.15 MOUNTING A SACRIFICIAL WINDOW TO THE NYX-14 PRO
Mount a sacrificial window to the Nyx-14 PRO as follows:
1. Remove the Nyx-14 PRO lens cap.
2. Screw the sacrificial window into the lens threading.