Xylem SDI-12 Data Logger iRIS 220, iRIS 320, iRIS 350, iRIS 150, iRIS 300 - Manual (Page 101)

95 iQuest (NZ) Ltd - PO Box 15169, Hamilton, New Zealand Tel: +64 7 857-0810 Fax: +64 7 857-0811 Email: [email protected]
The flash executive files are stored in the default firmware folder …\iLink\Firmware and are identified
by the filename extension .fls. Select the correct firmware file to download to the iRIS.
The application software files are stored in the default firmware folder …\iLink\Programs and are
identified by the filename extension .irs. Select any one of the files.
23. Click the [Automated Upgrade Tool] button. The Program Configuration form will appear. This form
allows you to reconfirm the program validity (variant and version) as well as select specialised
program variants such as camera, voice or custom. The example form below shows the standard
program V1.50 for a GPRS iRIS350.
For the camera or voice variants, simply enable the appropriate checkbox. For custom program
variants, enter the custom program name as supplied by iQuest and enable the “Custom” checkbox.
24. Click the [OK] button to continue. The upgrade components are validated and if successful a
confirmation dialog is shown. Click [Yes] to continue. Otherwise correct the problem and try again.