Xylem SDI-12 Data Logger iRIS 220, iRIS 320, iRIS 350, iRIS 150, iRIS 300 - Manual (Page 92)

iRIS Datalogger User Guide V1.50
86 iQuest (NZ) Ltd - PO Box 15169, Hamilton, New Zealand Tel: +64 7 857-0810 Fax: +64 7 857-0811 Email: [email protected]
Running an Audio Script File
Once a script file has been selected and verified, click on the [Run Script] button to execute the script which
will upload each of the specified audio files to the iRIS 3x0V. As each line of the script is processed, the top
panel (Audio File Panel) reflects the current audio file, partition and index number, and the bottom panel
displays the audio file waveform in a graphical format.
When the script has completed, a message will be displayed confirming that the upload procedure is
complete.
14.2.3 Uploading Audio Files over a Remote Connection
It is possible to upload audio files to an iRIS 3x0V that is connected to iLink over a radio or GPRS link.
However due to the potentially large file sizes involved, it is highly recommended that all audio uploads are
carried out with the logger connected directly to the PC via the RS232 port.
Also, if communication to the logger is lost during a script-based audio upload, the results may be
indeterminable as files may be only partially loaded so remote uploads should be carried out with caution
and only considered where a local connection is not possible.