Avaya Cajun P880 - Manual (Page 127)

Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0
Avaya ATM Uplink Module CLI Commands
1-117
reset
Command Mode
Configuration
Description
Reload the software and reset the system. When sessioned to the
ATM Uplink module, this command resets just the ATM Uplink
module. Same as the reload command.
Syntax
reset
Sample Output
This example shows the reset command. Note the module will jump
to the reset vector and the session to the module will be terminated.
Once the module has rebooted, you will have to re-establish a
session to it.
ATM(configure)# reset
Log entry 184 by event 2 at 00-May_23 19:50:27
: Alarm(60)
Description: Module reset detected : Module
6.[Module 6]
Jumping to the reset vector.
[session terminated]