Avaya Cajun P880 - Manual (Page 91)

Avaya P550R/P580/P880/P882 Multiservice Switch ATM Uplink CLI Reference Guide, Version 2.0
Avaya ATM Uplink Module CLI Commands
1-81
show pvc
Command Mode
Configure
Description
Shows detailed information for the pvc specified in pvcID.
Syntax
show pvc <link-name> [<pvcID>]
Table 1-51. Arguments, Parameters, Keywords
Sample Output
The following example displays the PVCs in Link1 and then detailed
information for pvc 1-4-101 in Link1:
ATM-9(configure)# show pvc Link1
PVCs for ATM Link Link1:
===============================
PVC Phys Incoming Traffic Red Pack
ID Port VPI VCI Priority Map Class ID
---------------------------------------------
1-4-101 1 4 101 0 UBR 0
1-4-102 1 4 102 1 CBR 0
ATM-9(configure)# show pvc Link1 1-4-101
ATM Link Link1 PVC 1-4-101 Configuration:
==================================
Incoming Priority Map : 0
Traffic Class : UBR
CDVT : 10000
PCR : 350000
Red Pack ID : 0
Name Definition
link-name The name of the link whose PVC’s you want to
view.
pvcID The identifier for the pvc. It is equal to
<physPort> - <vpi> - <vci>
(e.g., port number 1 with a vpi of 4 and a vci of
101 would have a pvcID of 1-4-101)
omit this number to see the list of all PVC
configured for this ATM Link.