4 deleting a timer, 24 channel – Teledyne LeCroy Summit T24 PCIe Multi-lane Protocol Analyzer User Manual User Manual
Page 101
Summit T24 PCI Express Multi‐Lane Protocol Analyzer User Manual
89
Channel
Teledyne LeCroy
3. Enter in values for the Timer in the fields provides in Secs, Millisecs, Microsecs and
Nanosecs on the Timer tab.
Figure 5.46: Setting the Timer Values
4. Click on the Actions tab and set the External and Internal Triggering, Sequencing and
Filtering options. You can label the timer.
5.23.4 Deleting a Timer
To delete a Timer
1. Right‐click on the Timer.
2. Select Delete This Event. The Timer will disappear from the event.
5.24 Channel
Every event has two channels, one upstream and the other downstream. You can use
both channels with any event. The channels are independent of each other. If both
channels are selected it is valid but no action occurs, and thus no timer and counter is
created.
shows three events in the Global State, the first event is on Channel
Up and the 3rd event is on Channel Down.