Teledyne LeCroy Summit T24 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 48)

Teledyne LeCroy Status Bar
36 Summit T24 PCI Express Multi‐Lane Protocol Analyzer User Manual
4.9.2 Recording Status
The second segment from the left in the Status Bar indicates recording status.
During recording, the current Recording Status is in a segment. When you activate the
Record function, this segment flashes a message depending on the selected
Recording Options, such as Waiting for Trigger, Uploading or Triggered.
 The status bar displays Waiting for Trigger while waiting for trigger to occur
based on the settings defined in the Recording Options.
Figure 4.6: Status Bar - Waiting For Trigger
The status bar displays Uploading when recording is complete and is being uploaded.
Figure 4.7: Status Bar - Uploading
The status bar displays Triggered when the trigger condition has occurred, but uploading
has not commenced yet.
Figure 4.8: Status Bar - Triggered
As uploading progresses, the percent increases to 100. You can abort this upload if you
wish by pressing the ESC button on your keyboard or
clicking in the Tool Bar.
4.9.3 Recording Activity
The third segment displays recorded activity as a series of blue vertical bars. The more
vertical bars that display, the greater the amount of activity recording. If there are no
vertical bars, there is no recording activity.
During uploading, the percent of the completed upload displays.