Teledyne LeCroy Summit T24 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 25)

Summit T24 PCI Express Multi‐Lane Protocol Analyzer User Manual 13
Using Probes Teledyne LeCroy
3.7 Using Probes
3.7.1 Example: Connecting the Summit T24 Analyzer to the Device Under Test
Using a Gen2 MidBus Probe
Note: Mid‐bus probes require attachment‐pad and reference‐clock connections. For information
about how to connect the attachment pad, reference clock, and cables in your system, see the
MidBus Probe Manual.
Components
Figure 3.7: iPass x4 to x8 Straight Cable
Figure 3.8: Gen2 Mid-bus Probe Pod for Summit T24
Figure 3.9: Half-size Gen2 Mid-bus Probe Cable and Header Assembly