STI 9624 - Manual

Safety Technology International, Inc.
2306 Airport Road • Waterford, Michigan 48327-1209
Phone: 248-673-9898 • Fax: 248-673-1246
Toll Free: 800-888-4784 • E-mail: [email protected]
Web: www.sti-usa.com
Safety Technology International (Europe) Ltd.
Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch
Worcestershire • B98 0HU • England • Tel: 44 (0) 1527 520 999
Fax: 44 (0) 1527 501 999 • Freephone: 0800 085 1678 (UK only)
E-mail: [email protected] • Web: www.sti-europe.com
INSTALLATION OF STI BEAM SMOKE DAMAGE STOPPERS ®
All specifications and information shown were current as of publication, and are subject to change without notice.
9623 JAN2006
IMPORTANT:
Do not attempt to install Beam Smoke wire guard until either the reflective
beam smoke detector or both the emitter and receiver have been perfectly
aligned according to the beam smoke installation instructions.
INSTALLATION INSTRUCTIONS
1. Center the wire guard over existing unit, making sure cutout in wire
guard is positioned over beam lens. Use caution not to hit or bump the
detector.
2. Position one clamp. Mark, drill and install one clamp first then complete
installation of remaining clamps. See pictorial for size.
Lag Bolts - If lag shields and lag bolts are used, make sure anchor is flush
with surface. Position guard, insert lag bolt and tighten. Bolt should be
selected to assure full thread engagement in anchor.
The STI-9623 guard may be spray painted prior to installation.
EXISTING DS240 &
DS241 DETECTOR
19033 ANCHOR
(4) PROVIDED
9623 GUARD
DRILL (4) .25 in.
6.3mm HOLES
19020 CLAMP
(4) PROVIDED
19013 SCREW
(4) PROVIDED
EXISTING FIRERAY
50/100R
SMOKE BEAM
DRILL (4) .25
6.3mm HOLES
19033 ANCHOR
(4) PROVIDED
19020 CLAMP
(4) PROVIDED
19013 SCREW
(4) PROVIDED
6 in.
(152mm)
6 in.
(152mm)
FRONT VIEW
SIDE VIEW
6 in.
(152mm)
5.5 in.(140mm)
4.75 in.
(120mm)
3.25 in.
(83mm)
8.875 in.
(225mm)
P
STI-9623 STI-9624
CAN BE MOUNTED VERTICALLY OR HORIZONTALLY
Electronic warranty form at www.sti-usa.com/wc14