STI 9115 - Manual

Safety Technology International, Inc.
2306 Airport Road • Waterford, Michigan 48327-1209
Phone: 248-673-9898 • Fax: 248-673-1246
Toll Free: 800-888-4784 • E-mail: [email protected]
Web: www.sti-usa.com
Safety Technology International (Europe) Ltd.
Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch
Worcestershire • B98 0HU • England • Tel: 44 (0) 1527 520 999
Fax: 44 (0) 1527 501 999 • Freephone: 0800 085 1678 (UK only)
E-mail: [email protected] • Web: www.sti-europe.com
INSTALLATION OF STI-9115 TAMPERPROOF THERMOSTAT COVER
All specifications and information shown were current as of publication, and are subject to change without notice.
9115 APRIL2009
CLEANING INSTRUCTIONS:
To clean cover, remove from wall. Rinse with water to remove abrasive dust
and dirt. Wash with soap or mild detergent using a soft cloth (DO NOT
SCRUB). Rinse once more, then dry with a soft cloth or chamois. To remove
grease or wet paint, rub gently with a cloth wetted thoroughly with
naphtha. Then wash and rinse. DO NOT USE RAZOR BLADES.
EXISTING THERMOSTAT WITH
DECORATIVE BEZEL
COVER
19049 WASHER (6) PROVIDED
19038 SPANNER BIT
(1) PROVIDED
19036 TAMPERPROOF SPANNER
HEAD SCREW #8 x 1 1/2 in.
(6) PROVIDED
19018 ANCHOR
(6) PROVIDED
INSTALLATION INSTRUCTIONS
1. Center protective cover over thermostat.
2. Using protective cover as template, mark and drill
(6) 3/16 in. (4.7mm) diameter holes as shown.
3. Install the tamperproof fasteners using the supplied
spanner bit.
EXISTING THERMOSTAT WITH
DECORATIVE BEZEL
9.37 in.(238mm)
2.87 in.(73mm)
7.37 in. (187mm)
1
PRODUCT DIMENSIONS
Electronic warranty form at www.sti-usa.com/wc14