KROHNE IFC 210 E-EEx EN - Manual (Page 86)

Sect. 10.3 Part D Technical Data, Measuring Principle and Block Diagram
IFC 210 E 05/2002
86
10.3 Dimensions and weights IFC 210 E-EEx / ZD / ZD-EEx
IFC 210 E and IFC 210 E-EEx Signal converters / IFC 210 E-EEx
Dimensions in mm
Weight approx. 1,3 kg support 3 HE, assembly dimensions in compliance with DIN 41494, Part 5
19” Subassembly support purchase order numbers
– Subassembly
support
including guiding rails, pre-installed 2.07230
– Subassembly support fully installed
including IFC 210 E,
multipole connectors plus solder points
– Blind plates 2 TE 3.06660.00
3 TE 3.06738.00
5 TE 3.06739.00
8 TE 3.06740.00
14 TE 3.06741.00
21 TE 3.07590.00
– Special design of
multipole connectors X1 and X2:
ZD and ZD-EEx Intermediate connection box Threaded terminal end 1) 5.08400
Weight approx. 0.5 kg/1.1 lbs Wire-Wrap (1 x 1) mm 5.08402
Termi-Point (0.8 x 1.6) mm 5.08403
1) Designated BG
connection component
2.07412
dimensions in mm
465.1 ± 1.6 (18.31“ ± 0.06“)
482.6 ± 0.4 (19“ ± 0.016“)
Guiding rails
F-shaped multipole
connector, DIN 41612
XA (XD) XC XB
Front plate
thread bore hole (M 2.5)
1 TE = 5.08 mm
1 HE = 44.17 mm
Multipole connector
attachment holes
28 TE = 142.24
84 TE = 426.72
3HE = 132.5
57.1
90 122
175.24 +0.86
-0.14
160
Attachment plane
Multipole connectors Attachment plane
Front plates
68
125
57
22
80