West Control Solutions N8800 - Manual (Page 42)

Configuration level
Configuration parameters 42 8800 process controller
Name Value range Description Default
O.Src Signal source of the analog output OUT4 (only visible when
O.TYP=1..5)
0
0 not used
1 controller output y1 (continuous)
2 controller output y2 (continuous)
3 process value
4 effective set-point Weff
5 control deviation xw (process value - set-point)
6 measured value position feedback Yp
fOut Forcing OUT1 (only visible with 8800/8840 configurator!) 0
0 No forcing
1 Forcing via serial interface
Out.5
Configuration parameters Out.2 = Out.1 except for: Default Y.1 = 0 Y.2 = 0
Out.6
Configuration parameters Out.2 = Out.1 except for: Default Y.1 = 0 Y.2 = 0
g
Method of operation and usage of output Out.1 to Out.6:
Is more than one signal chosen active as source, those signals are
OR-linked.
LOGI
Name Value range Description Default
L_r Local / Remote switching (Remote: adjusting of all values
by front keys is blocked)
0
0 no function (switch-over via interface is possible)
1 always active
2 DI1 switches
3 DI2 switches (only visible with OPTION)
4 DI3 switches (only visible with OPTION)
5 è - key switches
SP.2
Switching to second setpoint SP.2 0
0 no function (switch-over via interface is possible)
2 DI1 switches
3 DI2 switches (only visible with OPTION)
4 DI3 switches (only visible with OPTION)
5 è - key switches