West Control Solutions N8800 - Manual (Page 46)

Configuration level
Configuration parameters 46 8800 process controller
Name Value range Description Default
IAda Block auto tuning (only visible with 8800/8840
configurator!)
0
0 Released
1 Blocked
IExo Block extended operating level (only visible with
8800/8840 configurator!)
0
0 Released
1 Blocked
ILat Suppression error storage 0
0 Released
1 Blocked
Pass OFF...9999 Password (only visible with 8800/8840 configurator!) OFF
IPar Block parameter level (only visible with 8800/8840
configurator!)
0
0 Released
1 Blocked
ICnf Block configuration level (only visible with 8800/8840
configurator!)
0
0 Released
1 Block
ICal Block calibration level (only visible with 8800/8840
configurator!)
0
0 Released
1 Blocked
CDis3 Display 3 controller operating level (only visible with
8800/8840 configurator!)
2
0 No value / only text
1 Display of value
2 Output value as bargraph
3 Control deviation as bargraph
4 Process value as bargraph
TDis3 2...60 Display 3 display alternation time [s] (only visible with
8800/8840 configurator!)
10
PDis3 display 3 programmer-operating level 0
0 Segm.-No., Segm.-Type, Progr.-remaining time
1 Segm.-No., Segm.-Type, Segm.-remaining time
2 Segm.-No., Segm.-Type, net-time
3 Segm.-No., Segm.-Type, Progr.-remaining time
4 Segm.-No., Segm.-Type, Segm.-remaining time
5 Segm.-No., Segm.-Type, net-time
T.dis3 8 characters Text display 3
T.InF1 8 characters Text Inf.1
T.InF2 8 characters Text Inf.2
t.PrG01 8 characters Text Program 1
t.PrG02 8 characters Text Program 2
w w w
t.PrG16 8 characters Text Program16