Figure 23, Chronicle manager window with points – Innotech Chronicle User Manual
Page 20
Chronicle Installation Instructions
Page 20
© Mass Electronics Pty Ltd 2012
Edition 3.1 dated 31/03/2014
4. After a successful import, a Tree view of your network will be displayed underneath your
iComm server. If you highlight a device, it will then list all available points to the right, ready
to filter and select for logging.
Figure 23: Chronicle Manager Window with Points
Once the Import process has completed, the Chronicle Manager window updates with the imported
devices and points.
Trending and Reporting Panels
• Trending points are used in the Magellan Trend Frames and purge over time.
• Reporting points are used in the ATOM project. These points are also purged, however you can
determine if there is sufficient space available to ensure there is no loss of data.
You have the ability to use the filters to locate or isolate any points in the list. This can speed up the
selection process and help ensure you select all the required points.
Data storage works on a “first in, first out” scenario, and once the designated space is used, the
oldest data will be replaced with the newest to give a “sliding window” effect.