Chronicle manager monitor mode, Figure 26, Figure 27 – Innotech Chronicle User Manual
Page 22: Go to monitor button, Chronicle manager window, Go to monitor button chronicle manager window, Figure 26: figure 27
Chronicle Installation Instructions
Page 22
© Mass Electronics Pty Ltd 2012
Edition 3.1 dated 31/03/2014
Chronicle Manager Monitor mode
After successfully transferring the project to Chronicle Server, you have the option to monitor the
project using Chronicle Manager’s
Monitor Mode function.
Monitor mode allows you to monitor live data values of the points added to the Trending or Reporting
tabs. This is a useful commissioning tool to ensure that data values are correct and reading from
iComm.
Figure 27: Chronicle Manager Window
Figure 26: Go to Monitor Button
After clicking the Go to Monitor button, it will change to Go to Config as shown below in Figure 27.
While in Monitor mode, no project modifications are possible, you must “Go to Config” before you can make further
alterations. When monitoring in either Tab, you will notice the Orange Circle on the Tab and orange headings to
indicate you are in Monitor mode.