Table 1, Software table, Overview – Innotech Chronicle User Manual
Page 7: Chronicle implementation, Overview chronicle implementation
Chronicle Installation Instructions
Page 7
© Mass Electronics Pty Ltd 2012
Edition 3.1 dated 31/03/2014
Overview
This document explains the procedure to implement trending within a Magellan project.
This guide should be used in conjunction with the ATOM Installation Instructions which is available on
the
.
Chronicle Implementation
The following document has been developed to assist in the configuration of Trending
implementation in Chronicle Manager/Server.
For Release Versions:
Chronicle v1.9 or later
Requirements:
• Appropriate Hardware (Innotech or 3rd party).
• Software as shown in Table 1 below.
Supported Operating Systems
• Windows
®
Server 2008 R2 with Service Pack 1
• Windows 7 Professional (32-bit / 64-bit) with Service Pack 1
• Windows XP Professional 32-bit with Service Pack 3
Logo
Software
Description
iComm
Connects the Hardware to the software.
Chronicle Server
Reads values from iComm and sends them to the SQL
Server.
Chronicle Manager
This is used to program the Chronicle Server and also
contains a monitoring tool.
SQL Server 2008 R2/ SQL
Server Express 2008 R2
Handles SQL traffic and stores the values from Chronicle
Server into the SQL Database. The SQL Server also allows
calculations and querying of the database.
SQL Server Database
This is the actual SQL Database. The SQL Server handles
all traffic.
Magellan / eServer
Either of these are used to run the ATOM project.
e
Table 1:
Software Table
c
Chronicle supports SQLServer Express 2008 R2 with a maximum of 4 GB of data (10GB with optional dongle).