Innotech iSEA User Manual
Page 29
Advertising
Page 29
Innotech Service & Event Analyser Installation Instructions
© Mass Electronics Pty Ltd 2011
Chapter 3 – Configuring iSEA
Figure 3-15: FM Builder - Create a new iSEA Device
Figure 3-16: Create a new Point called
‘Chronicle Running’
11. Create 2 new devices on this server using the Device ID and Connection ID as listed in
iComm.
12. Create 1 digital point on the ‘iSEA’ device with the address ‘ChronicleRunning~Output’, and
a recommended update rate of 1 second (1000 milliseconds).
Advertising