HP Brocade 4Gb SAN Switch for HP BladeSystem p-Class - Manual (Page 35)

Fabric OS 5.0.0 procedures user guide 35
Example:
The number of devices listed should reflect the number of devices that are connected.
Tracking and controlling switch changes
The Track Changes feature allows you to keep a record of specific changes that may not be considered
switch events, but can provide useful information. The output from the Track Changes feature is dumped
to the system messages log for the switch. Use the
errdump
or
errshow
command to view the log.
Items in the log created from the Track Changes feature are labeled TRACK.
Trackable changes are:
• Successful login
• Unsuccessful login
• Logout
• Configuration file change from task
• Track Changes on
• Track Changes off
An SNMP-TRAP mode can also be enabled; refer to the
trackchangeshelp
command in the HP
StorageWorks Fabric OS 4.x command reference guide.
For troubleshooting information on the Track Changes feature, see ” Inaccurate information in the system
message log ” on page 200.
To enable the Track Changes feature:
1. Connect to the switch and log in as admin.
2. Issue the following command to enable the Track Changes feature:
trackchangesset 1
switch:admin> nsallshow
{
010e00 012fe8 012fef 030500 030b04 030b08 030b17 030b18
030b1e 030b1f 040000 050000 050200 050700 050800 050de8
050def 051700 061c00 071a00 073c00 090d00 0a0200 0a07ca
0a07cb 0a07cc 0a07cd 0a07ce 0a07d1 0a07d2 0a07d3 0a07d4
0a07d5 0a07d6 0a07d9 0a07da 0a07dc 0a07e0 0a07e1 0a0f01
0a0f02 0a0f0f 0a0f10 0a0f1b 0a0f1d 0b2700 0b2e00 0b2fe8
0b2fef 0f0000 0f0226 0f0233 0f02e4 0f02e8 0f02ef 210e00
211700 211fe8 211fef 2c0000 2c0300 611000 6114e8 6114ef
611600 620800 621026 621036 6210e4 6210e8 6210ef 621400
621500 621700 621a00
75 Nx_Ports in the Fabric }
switch:admin>