HP LaserJet M5025 Multifunction Printer series - Manual (Page 227)

Misformed characters
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
1. Print a few more pages to see if the problem corrects itself.
2. Make sure that the environmental specifications for the device are being met. See Operating
environment .
Page skew
1. Print a few more pages to see if the problem corrects itself.
2. Verify that no torn pieces of media are inside the device.
3. Make sure that media is loaded correctly and that all adjustments have been made. See Load
media into the input trays . Make sure that the guides in the tray are not too tight or too loose against
the media.
4. Turn over the stack in the tray. Also, try rotating the stack 180°.
5. Make sure that the type and quality of the media you are using meet HP specifications. See Media
and trays .
6. Make sure that the environmental specifications for the device are being met. (See Operating
environment .)
7. Perform a tray alignment by opening the Administration menu at the device control panel. On
the Print Quality submenu, touch Set Registration . Choose a tray under Source and then run a test
page. For more information, see Print Quality menu .
ENWW Solve print-quality problems 215