HP LaserJet M5025 Multifunction Printer series - Manual (Page 87)

Customize tray 1 operation
The device can be set to print from tray 1 if it is loaded, or to print only from tray 1 if the type of media
that is loaded is specifically requested.
Setting Explanation
Tray 1 size is set to Any Size
Tray 1 type is set to Any Type
The device usually pulls media from tray 1 first unless it is empty or closed. If you
do not keep media in tray 1 all the time, or if you use tray 1 only to manually feed
media, keep the default settings of the tray 1 size and type. The default settings
for both the tray 1 size and type are Any. You can change size and type settings
for tray 1 by touching the Trays tab under Supplies Status, and then touching
Modify.
Tray 1 size or type is set to anything other
than Any Size or Any Type The device treats tray 1 like the other trays. Instead of looking for media in tray 1
first, the device pulls media from the tray that matches type and size settings that
are selected in the software.
In the printer driver, you can select media from any tray (including tray 1) by type,
size, or source. To print by type and size of paper, see
Control print jobs .
ENWW Load media into the input trays 75