HP Photosmart 3110 All-in-One Printer - Manual (Page 109)

5. Press down on the gray latch until it clicks into place.
6. Repeat steps 2 through 5 for each ink cartridge you are replacing.
7. Close the ink cartridge access door.
Align the printer
Use this feature when the self-test report shows streaking or white lines through any
of the blocks of color.
If you still have print quality problems after aligning the printer, try cleaning the print
head using the procedure described in
Clean the print head . If print quality problems
persist after aligning and cleaning, contact HP customer support.
To align the printer from the control panel
1.
Load letter or A4 unused plain white paper into the main tray.
2. Press Setup .
3. Press 5 , then press 3 .
This displays the Tools menu and then selects Align Printer .
The HP All-in-One prints a test page, aligns the print head, and calibrates the
printer. Recycle or discard the page.
For information on aligning the printer by using the HP Image Zone software that
came with your HP All-in-One, see the onscreen HP Image Zone Help . For more
information, see Use the onscreen Help .
Chapter 11
106 HP Photosmart 3100 All-in-One series
Maintain your HP
All-in-One