HP Photosmart 3110 All-in-One Printer - Manual (Page 28)

Connection information
Your HP All-in-One comes equipped with a USB port so you can connect directly to a
computer using a USB cable. If you insert an HP bt300 or HP bt400 series Bluetooth
®
Wireless Printer Adapter into the front USB port, Bluetooth ® devices such as PDAs
and camera phones can print to your HP All-in-One.
Note In the remainder of this chapter, the HP bt300 or HP bt400 series
Bluetooth ® Wireless Printer Adapter is referred to simply as an HP Bluetooth ®
adapter.
Supported connection types
Description Recommended
number of
connected
computers for best
performance Supported software
features Setup instructions
USB connection One computer
connected with a
USB cable to the
USB port on the back
of the HP All-in-One. All features are
supported. Follow the Setup
Guide for detailed
instructions.
HP bt300 or HP
bt400 series
Bluetooth
® Wireless
Printer Adapter (HP
Bluetooth
® adapter)
One Bluetooth ®
device or computer.
Printing from a
Bluetooth
® device
such as a PDA or
camera phone, or a
Bluetooth
® -enabled
computer.
For information on
printing from a device
such as a PDA or
camera, see the
onscreen
HP Image
Zone Help .
For information on
printing from a
Bluetooth
® -enabled
computer, see
Connect using
Bluetooth®
.
Printer sharing Up to five computers.
The host computer
must be turned on at
all times, or the other
computers will not be
able to print to the
HP All-in-One. All features resident
on the host computer
are supported. Only
print is supported
from the other
computers. For setup
instructions, see
Use
printer sharing
(Windows)
or Use
printer sharing (Mac) .
Connect using a USB cable
To connect your HP All-in-One using a USB cable, follow the instructions in the
printed Setup Guide.
User Guide 25
Finish
setup