HP Photosmart 3110 All-in-One Printer - Manual (Page 32)

Use printer sharing (Mac)
If your computer is on a network and another computer on the network is connected to
the HP All-in-One using a USB cable, you can use that device as your printer using
printer sharing. Other computers on the network, which are referred to as clients, have
access only to the print features. All other functions must be performed on the host
computer.
To enable printer sharing
1.
On the client and host computers, do the following:
a.
Select System Preferences in the Dock.
The System Preferences window appears.
b. Select Sharing .
c. From the Services tab, click Printer Sharing .
2. On the host computer, do the following:
a.
Select System Preferences in the Dock.
The System Preferences window appears.
b. Select Print & Fax .
c. Click the check box next to Share my printers with other computers .
Fax setup
After completing all steps in the Setup Guide, use the instructions in this section to
complete your fax setup. Please keep your Setup Guide for later use.
In this section, you will learn how to set up your HP All-in-One so that faxing works
successfully with equipment and services you might already have on the same phone
line as your HP All-in-One.
Tip You can also use the Fax Setup Wizard (Windows) or Fax Setup Utility
(Mac) to help you quickly set up some important fax settings such as the
answer mode and fax header information. You can access the
Fax Setup
Wizard (Windows) or Fax Setup Utility (Mac) through the HP Image Zone
software. After you run the Fax Setup Wizard (Windows) or Fax Setup Utility
(Mac), follow the procedures in this section to complete your fax setup.
User Guide 29
Finish
setup