HP Hitachi Dynamic Link Manager Software - Manual (Page 190)

3. Creating an HDLM Environment
168
# lsdev -Cc disk
16. If GPFS + RVSD was used, delete the setting information from
/etc/vsd/
oemdisktypes.lst
• If HP XP series was used, delete the following line:
disk/fcp/HP fscsi disk/fcp
• If Thunder 9500V series, Lightning 9900V series (excluding HP XP series),
Hitachi USP (excluding HP XP series), Universal Storage Platform V/VM
(excluding HP XP20000 and HP XP24000), Hitachi Virtual Storage
Platform, or Hitachi AMS2000/AMS/WMS/SMS series was used, delete the
following line:
disk/fcp/Hitachi fscsi disk/fcp
17. If GPFS or GPFS + RVSD was used, execute the following utility to set the
LUN
RESET
option to
off
:
# /usr/DynamicLinkManager/bin/dlmodmset -r off
18. If you have been using VCS and have registered VCS scripts, you must delete the
VCS script registrations.
Delete the following line that was added to the
preonline
script:
system("/usr/DynamicLinkManager/cluster/dlm_vcs_pgr_release
$ARGV[1]");
19. If you do not need to start the
preonline
script when VCS starts, delete the
preonline
script and specify the settings so that the
preonline
script does not
start.
For details on the setting method, refer to the VCS documentation.
In the following example, the settings do not start the
preonline
script when
VCS starts:
# rm /opt/VRTSvcs/bin/triggers/preonline
# haconf -makerw
# hagrp -modify
service-group
PreOnline 0
# haconf -dump -makero
20. Execute the following command:
# installp -u DLManager.mpio