HP Hitachi Dynamic Link Manager Software User Manual
Page 266
6. Command Reference
244
port will be changed to the Online status. Is this OK?
[y/n]:y
KAPL01061-I 15 path(s) were successfully placed Online;
0 path(s) were not. Operation name = online
#
-cha -pathid
AutoPATH_ID
Use this parameter to place online, at one time, all the paths that pass through a
specific CHA port. The command will place online all the paths that pass through
the CHA port to which the path with the specified AutoPATH_ID is connected.
Specify the current AutoPATH_ID of the target path, which is displayed by using
the
view
operation. For details about the
view
operation, see 6.7 view (Displays
Information). Leading zeros can be omitted (
000001
and
1
indicate the same
AutoPATH_ID); however, when the target AutoPATH_ID is
000000
, enter
000000
or
0
for the parameter value.
AutoPATH_IDs are re-assigned every time the host is restarted. When you want
to add a new LU without restarting the host, AutoPATH_IDs are re-assigned to
each path of the LU when you execute the
cfgmgr
command. Always make sure
that you use the
view
operation to find the current AutoPATH_ID of the target
path, before executing the
online
operation.
Example
The following example shows how to place online the paths connected to the
CHA port
0A
. In this example, a path whose AutoPATH_ID is
000002
is
connected to the target CHA port.
When the confirmation message is displayed, the user enters
y
to continue,
or
n
to cancel the operation.
# /usr/DynamicLinkManager/bin/dlnkmgr online -cha
-pathid 000002
KAPL01057-I All the paths which pass the specified CHA
port will be changed to the Online status. Is this OK?
[y/n]:y
KAPL01061-I 2 path(s) were successfully placed Online; 0
path(s) were not. Operation name = online
#
-chaid
CHA-port-ID
Use this parameter to place online, at one time, all paths that pass through a
specific CHA port. The command will place online all paths connected to the
CHA port that has the specified CHA-port-ID. To display the CHA port IDs,
execute the following
view
operation: