HP Hitachi Dynamic Link Manager Software - Manual (Page 214)

4. HDLM Operation
192
4.3 Starting and Stopping the HDLM Manager
If an error occurs in the system, such as in an HDLM program, you may need to
manually stop or start HDLM to recover from the error.
4.3.1 Starting the HDLM Manager
To start the HDLM manager, log in to AIX as a user with root permissions and then
execute the following command.
# startsrc -s DLMManager
Lower case characters can be used for the command name (
dlmmanager
).
# startsrc -s dlmmanager
The startup script that was set up during HDLM installation runs, and starts the HDLM
manager.
Use the following HDLM command's
view
operation to confirm that the HDLM
manager is running:
# /usr/DynamicLinkManager/bin/dlnkmgr view -sys -msrv
HDLM Manager Ver WakeupTime
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
#
When the
HDLM Manager
column shows
Alive
, the HDLM manager is active.
4.3.2 Stopping the HDLM Manager
To stop the HDLM manager, log in to AIX as a user with root permissions, and then
execute the following command:
# stopsrc -s DLMManager
Lower case characters can be used for the command name (
dlmmanager
).
# stopsrc -s dlmmanager