Apple Final Cut Pro 7 User Manual
Page 1858
3
In the Capture Preset Editor, adjust the following settings, then click OK.
Enter a name and
appropriate description
for your audio
capture preset.
Choose None, unless
you are genlocking
your audio to your
video interface.
Choose an audio device
from this pop-up menu.
Choose an input
from the selected
audio device.
Choose an audio
configuration from
this pop-up menu.
a
If you’re synchronizing your audio deck to your computer by genlocking it to a video
capture interface, choose your video capture interface from the Digitizer pop-up menu
in the QuickTime Video Settings section. Otherwise, you can choose None.
b
In the QuickTime Audio Settings section, choose an audio interface from the Device
pop-up menu. The audio capture interface can be identical to your video capture
interface, or you can use a different device.
c
Choose the input on the audio interface you used to connect your audio deck from
the Input pop-up menu. (Some video and audio capture interfaces have more than
one set of audio inputs to choose from.)
d
Choose an audio configuration (sample rate, bit depth, and number of channels) from
the Format pop-up menu.
If you are doing a digital transfer from your audio device to your computer, you should
choose the sample rate of your audio source. If you are digitizing audio from analog
inputs on your audio interface, choose a sample rate that matches the majority of the
media files in your project, or the sample rate of your sequence.
For detailed information about other settings in the Capture Preset Editor, see
1858
Chapter 113
Capture Settings and Presets