Apple Final Cut Pro 7 - Manual (Page 818)

Displaying Timecode Affected by Speed Changes
If you alter the speed of a clip by applying a constant or variable speed change, the frames
of the media file are no longer played at their original rate. By default, Final Cut Pro displays
the timecode in italics whenever a clip is not playing at normal speed. This option, called
View Native Speed, is selected by default.
When View Native Speed is selected, Final Cut Pro displays the clip’s source timecode
(the timecode stored in the media file’s timecode track), so you may see timecode numbers
repeated or skipped because the video frames themselves are repeated or skipped to
create the speed change.
For example, if you adjust a clip’s speed by 200%, Final Cut Pro plays the media file at
twice the normal speed, which actually means only half the frames are played (every
other frame is skipped). The timecode display shows the actual timecode number of each
frame, so the timecode numbers skip, just as the video frames do.
When View Native Speed is deselected, Final Cut Pro increments the timecode number
for every frame of the speed-adjusted clip, regardless of which frame of the media file is
shown. This timecode display has no accurate relationship to the timecode of the media
file or original source tape, but is helpful if you want to see the timecode display increment
each time you move forward or backward within the clip. When you turn off View Native
Speed, Final Cut Pro creates the illusion that every frame you see in the speed-adjusted
clip has a unique timecode number, instead of the timecode numbers incrementing
whenever a different frame from the media file is shown.
Usually, it’s best to keep View Native Speed selected because it shows you the actual
timecode number for each frame in the media file. If you want to reference a particular
frame on your source tape or in the media file, you should have View Native Speed
selected so you see the correct source timecode number associated with that frame.
Choosing Source and Auxiliary Timecode Track Display
QuickTime media files can have several timecode tracks, although they typically start with
one. The timecode track written when you first capture a media file is called the source
timecode track. You can add additional timecode tracks to the media file after you capture.
These are called auxiliary (aux) timecode tracks.
Auxiliary timecode tracks do not refer to the original timecode from your source tape,
since this is the purpose of the source timecode track. Instead, they can refer to timecode
on a different tape, such as an independent audio tape recorded at the same time as the
video. In these dual system productions (in which video and audio were recorded
separately), the timecode on the videotape and the audio tape are often not the same;
yet in post-production, you need to synchronize the video and audio media files together
to edit.
818 Chapter 51 Working with Timecode