Lull 1044C-54 Series II Operation Manual - Manual (Page 11)

SAFETY
3
OPERATION SAFETY
‰
Safe operation is the responsibility of the operator.
‰
Improper use of the vehicle can lead to dangerous
situations for yourself, those around you, the
vehicle and the work area. You must have safe
working habits and be aware of hazardous
working conditions.
‰
Thoroughly read and understand this entire
manual. Follow all safety rules and practices
explained in this manual.
‰
The vehicle must be checked every day or at the
start of each shift. See “Check the Equipment” on
page 8.
‰
To meet the requirements of different operating
conditions, JLG offers optional lighting packages
for your vehicle. Do not operate the vehicle if it is
not equipped with lights when conditions require
them. If your vehicle is not equipped with the
proper lights, contact your authorized JLG dealer
for available lighting packages.
‰
If operating in an enclosed or partially enclosed
environment, make sure there is enough
ventilation. Engine exhaust fumes can be deadly
to you and those around you if precautions are not
taken. Questions about the air quality in the
working environment and sampling methods
should be directed to a qualified person.
Never operate the vehicle controls while you are
outside the cab. You must be properly seated in the
cab before operating any controls.
Before Leaving the Cab…
•
Bring the vehicle to a full stop.
•
Apply the park brake.
•
Lower the boom.
W
1008
Before Leaving the Vehicle Unattended…
•
Stop the engine.
•
Block the wheels if parked on an incline.
•
Lower the boom.
The vehicle is considered “attended” when the operator
is less than 25 feet from the vehicle and it remains in the
operator’s view.
The vehicle is considered “unattended” when the
operator is 25 feet or more from the vehicle and the
vehicle is in the operator’s view, or whenever the
vehicle is not in the operator’s view.
Never stand or walk under a raised boom. Do not allow
others to do so.
Never allow passengers on the vehicle.
W
1
009
W
1
007