Lull 1044C-54 Series II Operation Manual - Manual (Page 30)

22
INSTRUMENTS AND CONTROLS
Auxiliary Controls
Auxiliary Controls
A switch is located on the top of the front & rear
joysticks, under a protective rubber cap. Pressing this
switch down with your thumb activates the auxiliary
function. Hold the switch down while moving the joystick
left and right.
Functions for the tilting carriage using the front joystick
are shown below as an example.
Note: Releasing the switch while moving the joystick
left or right changes the function of the joystick
back to the standard joystick controls.
Tilting Carriage Control
Rotating Tilt Carriage to Left
Holding the button down and moving the front joystick to
the left rotates an optional tilting carriage to the
operator’s left.
Rotating Tilt Carriage to Right
Holding the button down and moving the front joystick to
the right rotates an optional tilting carriage to the
operator’s right.
V
1
032
V
1033
V
1034