Smittybilt 76862 XRC Rocker Guards - Manual

WWW.SMITTYBILT.COM
For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 West Artesia Blvd, Compton, CA 90220
Installation Instructions
XRC Rocker Guards
Part # 76872, 76871, 76861, 76862
Parts Included Qty
Driver Side Rocker Guard 1
Passenger Side Rocker Guard 1
3/8” Counter-sunk Bolt 10
3/8”Flat Washer 10
3/8”Lock Nut 10
Step 1: Take off and remove any existing flares or rocker guards that you may have on your vehicle.
(Fig A) Make sure to clean the side of the vehicle before installing the guards.
Step 2: Loosen the lower bolts on each of the front and rear flares. (Fig A)
(Fig A) (Fig B)
Step 3: Remove all of the body mount bolts on the passenger side (or which ever side you begin with)
including the front one. Note: Make sure vehicle is on a level surface.
NOTE: Carefully read entire instructions thoroughly before attempting to install this part.
Remove any existing plastic
flares/steps or rocker guards
on the side of your vehicle.
Loosen the bottom bolts of both the
front and rear fender flares.