CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System - Manual (Page 170)

156
Setting Up a Module
Up to 16 connected I/O devices can be combined to be one module for the GV-System to use. Note
that I/O devices from GV-Video Server, GV-Compact DVR and GV-IP Camera can be combined to
build a module. However, I/O devices of GV-Wiegand Capture can only combine with those of another
GV-Wiegand Capture to set up a module.
1. Establish the connection to GV-Video Server, GV-Wiegand Capture, GV-Compact DVR or GV-IP
Cameras. For details, see Hybrid and NVR Solution in Chapter 1.
2. In the Virtual I/O Device Setting dialog box (see Figure 2-33), select one device, e.g. GV-Video
Server, GV-Comact DVR, GV-IP CAM 1.3M I/O, and then click the Add button. This dialog box
appears.
Figure 2-34
3. The connected devices appear on the IP address list. Select the desired devices and click the [>>]
button to add their I/O devices to the Mapping list. The total number of added I/O devices is
displayed at the bottom of the Mapping list. Click OK.
4. Select the added module from the list, and define the input status in the Monitor Input section. For
details, see [Input x], Setting Up I/O Device, earlier in this chapter. Click OK.
5. On the main screen, click the I/O button. This module is available from the selection list.