CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System - Manual (Page 38)

24
The system allows you to send a custom sound file to telephone. Your computer must have
microphones connected to the MIC input of GV-System for this operation. To record a sound file, follow
these steps:
1. Click the Rec button to bring up the following dialog box:
Figure 1-19
2. Click the Record button to start recording. Speak the message script clearly to the microphone.
Click Stop button when it is done.
3. Click the Play button to listen to the recording. To save this sound file, click File, select Save as,
and then click the Change button. This brings up the Sound Selection dialog box.
Figure 1-20
4. Select PCM 8,000 Hz, 8-bit Mono, the only format supported for this feature, and then click OK.
To find a sound file, click the Browse button to locate the file. Add the path of the file to the field, and
the file will be sent with the telephone calls.
[TCP Server] Allows you to setup TCP server. Select Assign IP and use the drop-down list to select
the network card. Your IP address will be displayed in Bind IP. The default port number for TCP server
is 3550; you may assign different port by entering the port number in the Port field.
[Multicast Server] Allows you to setup the Multicast server; its operation is similar to the TCP server
setup described above. The default port number for Multicast server is 3650.
Note: GV-System automatically checks the dynamic IP of your PC every one minute. This ensures
connection of remote applications, including Remote View, IP Multicast, WebCam, and Remote
Playback.
[HotLine Option] If motion persists, decides how often, specified in minutes, the system should send
a notification to you before the motion ends.
[HotLine Attach Audio Message] Specify how many times to repeat the audio message when a
telephone call is made to you.