CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System - Manual (Page 391)

Useful Utilities
10
Starting the Server
To configure the server and start the service, follow these steps:
1. Click the Server Setup button (No. 4, Figure 10-24). This dialog box appears.
Figure 10-28 Sever Setup
[Network Setting] The default port number is 3663. Using UPnP for automatic port configuration
to your router, click the Arrow button. For details, see UPnP Settings in Chapter 6.
[Authorized ID and Password] The ID and password entered will be those for the local DVRs to
log in the server.
„ Enhance network security: Enable to enhance network security on Authentication Server.
„ Enable IP White List: Create a list of IP addresses allowed to connect to Authentication
Server. For details, see IP White List Settings in Chapter 6.
[Server Setting]
„ Auto start service when server startup: Starts automatically the service when Windows
starts.
„ Notify when DVR disconnected from server: Notifies the Authentication Server with a
pop-up window when the DVR and server loss connection.
2. Click OK to apply above settings.
3. Click the Start/Stop Service button (No. 5, Figure 10-24) to start the connection.
377