CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System - Manual (Page 61)

Configuring Main System 1
Switching to Full-Screen View
For full-screen display, first select the Enable Directdraw Overlay option (Figure 1-3). Click the
Configure button (No. 14, Figure 1-2), point to A/V Setting, and then select Full Screen to switch to
full screen. Right-click on the full screen and select Toggle Full Screen to switch back to normal view
screen. Alternatively, press [F] on the keyboard to toggle between full-screen view and normal screen
view.
Listening to Live Audio
Click the Configure button (No. 14, Figure 1-2), point to A/V Setting, select Wave Out, and then
select the audio channel you wish to listen to.
By default, audio channel 1 is set to be background sounds even when you switch between video
channels. To change background sounds, select the desired audio channel and select Disable
Wave-Out Audio Switch. The selected audio channel will always be in the background.
Stopping Video Lost Watchdog
When the video signal is weak, the software watchdog will try to recover the lost video by restarting the
system and even rebooting the computer. If the video lost watchdog feature is not required, you have
the option to disable it.
To disable this feature, click the Configure button (No. 14, Figure 1-2) , point to Tools, select Video
Signal Diagnostic, and select Disable Video Signal Weak Watchdog.
Note: This option is only available for GV-600, 650, and 800 Cards.
Deactivating Video Lost Beep
To stop a beep noise when any of videos lost, click the Configure button (No. 14, Figure 1-2), point to
Tools, select Video Signal Diagnostic, and select Disable Video Lost Beep.
47