JUMO 705060 mTRON T - Multifunction Panel 840 Operating Manual - Manual (Page 149)

149
13 Configuration
13.11 Groups
The Groups menu is used to determine which channels (analog channels, digital channels,
counters and integrators) are displayed and/or recorded. It also specifies how data is to be re-
corded (memory rate, memory operation, and eco operation).
The user can configure a maximum of nine groups.
Setup dialog
Parameter
NOTE!
Groups can only be configured if the extra code "Registration function" is active.
NOTE!
If batch reporting is to be used, at least one group must be active.
Parameter Selection/settings Description
Status This parameter determines what happens with the group.
Inactive
(factory setting for group 4 to 9) The group data is neither displayed nor
saved.
Display only The group data is displayed on the
screen.
Display / Save
(factory setting for group 1 to 3) The group data is displayed on the
screen and saved. The group data can
only be evaluated using a PC if it has
been saved.