Landoll MCCS2253 18,9 RIGID PULVI-MULCHER - Manual (Page 16)

2-6 1K965
ASSEMBLY
Drawbar Installation
Small parts for the drawbar are shipped in 1K189
Drawbar Box Assembly.
1. Attach Drawbar to the Frame with two 1” X 7 7/16”
Pins, Flat Washers and 1/4” X 1 1/2” Cotter Pins. See
Figure 2-8.
2. Attach Safety Chain with 1-8 X 3 1/4” Carriage Bolt,
Flat Washers and Lock Nut.
3. Attach the Hose Support with 5/8” X 2” Bolt, Flat
Washer and Lock Nut.
4. Install Jack.
5. Attach the Hitch with 1 1/4” X 8 3/4” Pin and 5/16” X
2” Roll Pins and Washers.
Figure 2-8: Drawbar, Hitch and Safety Chain Installation
Drawbar
Cotter Pin,
1/4 X 1 ½
Pin,
1 X 7 7/16
1” Flat Washer
Hose Support
Jack
Safety Chain
5/8”-11,
Bolt
Flat
Washer
Lock Nut
Hitch