Landoll MCCS2253 18,9 RIGID PULVI-MULCHER - Manual (Page 31)

ASSEMBLY
2-21
Scrapers - Standard on Rear
F or 20" wheels, Scrapers are installed as shown. See
Figure 2-26. The Scraper Brackets are located on the
inside of the End Brackets and attach with U-bolts
3/8-16 X 3-1/4 X 2-7/16, Flat Washers, Lock Washers,
and Nuts. The Scraper Tubes are to be centered with
respect to the
machine and are fixed between the
Scraper Bracket and a narrow 2" wide Scraper with
U-bolt 3/8-16 X 3-1/4 X 2-7/16, Flat Washers, Lock
Washers, and Nuts. The narrow 2" wide Scrapers are
also used at the inner end of each axle assembly.
Optional Front Scrapers - Install similar to rear
Scrapers.
Figure 2-26: Scrapers
Scraper Tube
LH Scraper Brkt.
RH Scraper Brkt.
Scraper Brkt.
Capscrew, 3/8-16 X 3 ½
Capscrew,
3/8-16 X 3 ½
U-Bolt,
3/8-16 X 3 1/4 X 2 7/16
Capscrew,
½ - 13 X 1 3/4
Washer
Lock Washer, ½
Hex Nut, ½ -13
Scraper, 2 ½” Wide
Scraper 2” Wide
Flat Washer, 3/8
Lock Washer, 3/8
Hex Nut, 3/8-16