1 explanation of symbols, 2 general safety notes, 3 transport and storage – Lenze MGXQK DC motors User Manual

Page 4: 1 unpacking, 2 transport within the site of installation, 3 conditions of storage, 4 waste disposal of the packing material, Explanation of symbols, Transport and storage

Advertising
background image

4

1. Explanation of symbols

Danger !

General danger (Danger of persons and/or

material)

Use in hazardous areas is prohibited.

Dangerous electrical voltage.

High temperature.

Assembly or dismantling using hammers or

other striking tools is prohibited.

Note: Use raw material for recycling.

2. General safety notes

First read, then act !

2.1 Users

Assembly, commissioning, operation, and

maintenance only by specialists or skilled

personnel.

2.2 Safety notes
n

Read operating instructions before

asembly, commissioning, operation, and

maintenance.

n

Observe safety notes and warning symbols

in the individual chapters.

n

Observe regulations for safety and

prevention of accidents.

n

Do not operate in hazardous areas !

n

Only intended use is permissible.

n

For non--intended use and non--authorized

modifications, the product liability and

warranty are invalid.

3. Transport and storage

3.1 Unpacking
¯

Take drive components out of the packing

and check for transport damages.

¯

Check if the shipment is complete.

3.2 Transport within the site of installation
¯

Tranport motors only with sufficiently strong

transportation tools or hoists. Ensure safe

fixing.

Some of the motors are equipped with

eyebolts for a safe fixing at the hoists (for

weights see chapter 4.5).

¯

Transport motors vibration--free

¯

Avoid strong shocks and impacts

3.3 Conditions of storage
¯

Location of storage:

-- vibration--free

If there is a risk of vibration, it is

recommended to rotate the rotor in its

bearings once a week.

-- dry without aggressive media

-- no dust

-- no fast temperature changes

¯

Corrosion:

-- steel parts are protected against corrosion

by the factory. Do not remove this

protection, check in intervals of approx.

three months and renew, if necessary.

In case of intermediate storage > 3 months
¯

Collector:

-- take off carbon brushes from the collector

surface

-- protect collector by a piece of paper

around the running surface.

3.4 Waste disposal of the packing material
n

Packing material can be recycled.

3.4

Show/Hide Bookmarks

Advertising
This manual is related to the following products: