Lenze E94AxHE Technology Application Synchronism - Manual (Page 60)

9400 Technology applications | Synchronism with mark synchronisation
Parameter setting & configuration
Parameterisable function blocks
60
L
EDS94TA10040xxxx EN 1.1 - 10/2008
4.14.9 ElectricalShaftVal
Is an instance of Function
L_SdSetAxisVelocity  Master value processing (C 33)
Parameter Possible settings Information
C03590 -214748.3647 214748.3647 Status
• Display of the bit-coded output
signal dnState.
C03591/1 String of digits Position unit
• Read only
C03591/2 String of digits Speed unit
• Read only
C03592 -214748.3647 unit/t 214748.3647 Speed at the output
• Read only
• Is generated from the speed
signal dnSpeedOut_s.
C03593 -214748.3647 unit/t 214748.3647 Master speed
• Read only
• Is generated from the speed
signal dnSpeedIn_s.
C03597 -214748.3647 unit 214748.3647 Measured cycle
• Display of output signal
dnTpTpDistance_p in real unit of
the machine.
C03598 -214748.3647 unit 214748.3647 Measured Tp deviation
• Display of output signal
dnDifference_p in real unit of the
machine.
C03599 -214748.3647 unit 214748.3647 Position at the output
• Display of the dnPosOut_p output
signal in the real unit of the
machine.
C03604 TP deviation detected
• Display of output signal
bTpDiffRecogn.
0 FALSE
1 TRUE
C03605 Start of cycle
• Display of output signal bZeroPos.
0 FALSE
1 TRUE