Yamato Scientific HC200 Cool Block - Manual (Page 11)

9
FIXED TEMPERATURE OPERATION
Start up
After setting up HC200, follow the procedure below to start operation
NOTE: When turned on power, HC200 will automatically select the behavior in accordance
with the following cases.
♦
When you use HC200 for the first time:
♦
When stopped by using the abort function:
♦
When stopped during the program operation and the quick auto-stop operation with the
resume function inactive: ( is set to off )
⇒ ⇒ ⇒ ⇒ When you turn on the power switch, HC200 automatically selects the fixed temperature operation mode
and is in standby condition. The main display shows the latest measured temperature, while the sub
display shows the previously preset temperature.
⇒ ⇒ ⇒ ⇒ The STANDBY lamp lights up and the FIXED TEMP lamp starts flashing.
♦
When turned off power during the Fixed temperature operation:
⇒ ⇒ ⇒ ⇒ When you turn on the power switch, HC200 automatically starts the fixed temperature operation toward
the temperature that has been set before turning off. The main display shows the latest measured
temperature, while the sub display shows the previously preset temperature.
⇒ ⇒ ⇒ ⇒ The FIXED TEMP lamp is lit.
⇒ ⇒ ⇒ ⇒ When changing the set temperature, see “
Changing Preset Temperature during Operation
” on
page 11.
♦
When stopped during the program operation and the quick auto-stop operation with the
resume function activated: ( is set to on)
⇒ ⇒ ⇒ ⇒ When you turn on the power switch, HC200 automatically starts the fixed temperature operation toward
the preservation temperature that has been set before turning off. However, in case of the quick auto-
stop operation, HC200 starts the quick auto-stop operation from the first in the condition that has been set
before a black out. The main display shows the latest measured temperature, while the sub display
flashes
⇒ ⇒ ⇒ ⇒ The PROGRAM lamp is lit.
⇒ ⇒ ⇒ ⇒ When changing to the fixed temperature operation, bring HC200 to the standby condition in the fixed
temperature operation by pushing the MENU key.