Rockwell Automation 7000 DPI Wireless Interface Module - Manual (Page 30)

3-8 Configuring the WIM
C. You will need to enter a name and address for the remote device
on its network (see Figure 3.13 or Figure 3.14 ).
D. Tap Next -> and return back to Step 6 on Page 3-4 to continue.
Assigning a Name for the WIM (optional)
The WIM can be assigned a custom name (up to 16 alpha-numeric
characters) that represents its associated drive’s application function,
such as Pump 1 or Conveyor A. After successfully establishing a custom
WIM name, it replaces the default drive name (for example, PowerFlex
70 480V 5.0A) that appears in the “Searching for Bluetooth
Connections” screen and will now be recognized on the network.
Figure 3.13 DeviceNet and
ControlNet Remote
Configuration Address
Screen
Figure 3.14 EtherNet/IP
Remote
Configuration
Address Screen