Rockwell Automation 7000 DPI Wireless Interface Module - Manual (Page 68)

C-6 Wireless Flash Updating DPI Devices
10. From the StatusMonitor screen, select Tasks > Device Properties
( Figure C.11 ) to display drive information. If a peripheral device
(communication adapter or WIM) was flash updated, select Port >
and then the appropriate port number (for example, Port 1) to show
information for that device.
Figure C.11 StatusMonitor Task Menu Screen
11. With the DeviceProperties screen ( Figure C.12 ) displayed, verify
that the Product Revision number matches the firmware version that
was flashed to the device.
Figure C.12 DeviceProperties Screen