Table 3 - additional documentation – Rockwell Automation 1756-RMxx ControlLogix Enhanced Redundancy System User Manual User Manual
Page 14
14
Rockwell Automation Publication 1756-UM535D-EN-P - November 2012
Preface
The following publications provide specific information about communication
module connections.
You can view or download publications at
To order paper copies of technical
documentation, contact your local Allen-Bradley® distributor or Rockwell
Automation sales representative.
Table 3 - Additional Documentation
Resources
Description
1756 Communication Modules Specifications Technical Data, publicat
Describes Ethernet communication module specifications.
ControlNet Modules in Logix5000 Control Systems User Manual, publication
Describes ControlNet modules and how to use ControlNet modules with a Logix5000
controller.
EtherNet/IP Modules in Logix5000 Control Systems, publication
Describes how to use EtherNet/IP communication modules with your Logix5000
controller and communicate with various devices on the Ethernet network.
Ethernet Design Considerations for Control System Networks, publication
Provides fundamental best-practice guidelines for designing the Ethernet
infrastructure for your Supervisory Controls and Data Acquisition (SCADA) and MES
(Manufacturing Execution Systems) systems with Rockwell Automation software and
hardware products.
EtherNet/IP Embedded Switch Technology Application Guide, publication
Describes how to configure and implement a device-level ring topology.
EtherNet/IP Socket Interface Application Technique, publication
Describes the socket interface used to program
MSG instructions to communicate between a Logix5000 controller via an
EtherNet/IP module and Ethernet devices that do not support the EtherNet/IP
application protocol, such as bar code scanners, RFID readers, or other standard
Ethernet devices.