Rockwell Automation 1755-OF8 GuardPLC Controller Systems - Manual (Page 210)

210 Publication 1753-UM001C-EN-P - March 2010
Chapter 18 Introduction to EtherNet/IP Communication
N120:0 corresponds to the first INT tag in the GuardPLC assembly 120.
N120:1 corresponds to the second INT tag in the GuardPLC assembly
120.
Read BOOLs from the GuardPLC Controller and Display Them on
the PanelView Plus Terminal
This example uses input assembly 122. Two BOOL tags,
fromGuard_BOOL1 and fromGuard_BOOL2, were used in the
controller as shown.